Plastic plugs
- Used as a low-cost method of closing off the rail attachment holes
- Can be fitted manually with fairly simple tools
- Recommended for use with protected axes or in environments with low levels of contamination, e.g. handling
- Accessory MONORAIL MR
- Quantity supplied: Pack of 25 pcs
- Can be fitted manually with fairly simple tools
- Recommended for use with protected axes or in environments with low levels of contamination, e.g. handling
- Accessory MONORAIL MR
- Quantity supplied: Pack of 25 pcs
Brass plugs
- Used in applications with increased contamination or external temperature influences, e.g., in the case of chip impact or whenever a smooth and gap-free rail surface is Required
- a hydraulic MWH fitting tool is Recommended for correct installation
- Accessory MONORAIL MR
- a hydraulic MWH fitting tool is Recommended for correct installation
- Accessory MONORAIL MR
Steel plugs
- Made of Stainless steel
- two-part steel plugs suitable for applications with greater demands on the mechanical stability of rail surfaces, e.g. when mechanical loads are higher or in open chip spaces
- Combine the advantages of simple and Very Precise installation and a High degree of mechanical stability
- Accessory MONORAIL MR
- two-part steel plugs suitable for applications with greater demands on the mechanical stability of rail surfaces, e.g. when mechanical loads are higher or in open chip spaces
- Combine the advantages of simple and Very Precise installation and a High degree of mechanical stability
- Accessory MONORAIL MR
Additional wiper Viton®
- Provide extra protection of the carriages in heavily contaminated environments
- Made of Viton® (fluoroelastomer)
- Suitable for use with aggressive coolants
- Retrofitting is possible without the need to remove the carriage from the rail
- Can be used in combination with ASM metal wipers
- Accessory MONORAIL MR
- Made of Viton® (fluoroelastomer)
- Suitable for use with aggressive coolants
- Retrofitting is possible without the need to remove the carriage from the rail
- Can be used in combination with ASM metal wipers
- Accessory MONORAIL MR
Metal wiper
- Made of stainless steel
- Used when large, loose particles of dirt on the guideway need to be removed
- The radial gap between the wiper and guideway is narrower than in the MR-4S front panel and is therefore designed in such a way that the particles cannot get stuck
- Effective when combined with additional ZCV wipers
- Accessory MONORAIL MR
- Used when large, loose particles of dirt on the guideway need to be removed
- The radial gap between the wiper and guideway is narrower than in the MR-4S front panel and is therefore designed in such a way that the particles cannot get stuck
- Effective when combined with additional ZCV wipers
- Accessory MONORAIL MR
Assembly rail
- Required when a carriage has to be removed from the rail
- Advise: Leave the assembly rail in the carriage to protect the balls against contamination
- The two internal carriage attaching screws can be fitted and tightened through the two holes in the assembly rail
- Accessory MONORAIL MR
- Advise: Leave the assembly rail in the carriage to protect the balls against contamination
- The two internal carriage attaching screws can be fitted and tightened through the two holes in the assembly rail
- Accessory MONORAIL MR
Lubrication plate
- Assured supply of lubrication in any installation position
- Long lubrication intervals of up to 5,000 km or 12 months according to use
- Refill apertures closed with screws
- Reduced outlay on lubrication and accessories
- Low environmental impact thanks to minimum consumption of lubricant
- Wipers have a long service life as oil is also supplied to the top surface of the rail
- The Lubrication plates have the same dimensions as the carriages front plates
- Used in dry and clean environments i.e. on the ancillary axes of machine tools
- Long lubrication intervals of up to 5,000 km or 12 months according to use
- Refill apertures closed with screws
- Reduced outlay on lubrication and accessories
- Low environmental impact thanks to minimum consumption of lubricant
- Wipers have a long service life as oil is also supplied to the top surface of the rail
- The Lubrication plates have the same dimensions as the carriages front plates
- Used in dry and clean environments i.e. on the ancillary axes of machine tools
